Timber Fencing – Accoustic Barriers

We offer acoustic solutions for residential, commercial, industrial, railway and   highway applications that can reduce noise levels by as much as 32 decibels   while maintaining an attractive and natural façade; that’s a real reduction in   sound of 10dB, as heard by the human ear.

Accoustic Barriers in 3 styles

Standard accoustic meets most residential and industrial requirements.

The plus version offers the extra noise protection of an additional layer of   absorptive material contained within a plastic membrane.

The highwayversion is specially designed to satisfy stringent highway   standards, in heights up to 6m with steel posts.

Accoustic Plus Barrier

The Accoustic Plus Barrier system can be offered with either the unique timber   tuning fork posts, or the steel I beam posts dependent on the application.

In   addition an absorptive layer, covered with a protective membrane is incorporated   on one side of the panel to further reduce noise by an average of 4dB.

Timber Fencing – Hit and Miss

These popular fencing panels, also known as Ventilation panels, offer a high degree of privacy with a very attractive look. The design of the hit and miss panel is such that wind is allowed to pass through the panel.

Hit and Miss Horizontal

• Panels have a profiled timber frame mitred at the corner – not just nailed   slats
• Hit and Miss design allows some wind to pass through – less wind resistance
• All fixings are stainless steel
• Matching gates available
• All timber is planed all round

Hit and Miss Vertical

• Panels have a profiled timber frame mitred at the corner – not just nailed   slats
• Hit and Miss panels’ design allows some wind to pass through – less wind   resistance
• All fixings are stainless steel
• Matching gates available
• All timber is planed all round

Hit and Miss Convex

Panels are 1.83m wide, framing 40x50mm, recessed to take boards. Boards 100 x   12mm with internal battens 50 x 12mm. All timber is planed all round, and   supplied in natural finish.

• Designed for use with slotted posts
• Panels have a profiled timber frame mitred at the corner – not just nailed   slats
• Hit and Miss design allows some wind to pass through – less wind resistance
• All fixings are stainless steel
• Matching gates available
• All timber is planed all round

Hit and Miss Chevron

This new design has advantages over our standard chevron panel; it offers more   privacy and is a barrier, also its visual appearance is excellent both sides,   which gives your neighbour the same fence as you!

• Designed for use with slotted posts
• NEW Design – looks good both sides
• Fixings are stainless steel
• Morticed and tenoned frame for extra strength
• Centre rail(s) for additional support
• All timber is planed all round

Timber Fencing – Tongue and Groove

These superb panels are 1830mm wide,   with heights of 0.9m to 1.8m. Top and bottom rails 70 x 51mm and sides 45 x   51mm.  The infill of the panel is a tongue and groove board.  The centre of the panel is given additional   support with one or two 70mm wide rails depending on the fence height.

Standard Tongue & Groove

• All timber used throughout is superior quality
• Designed for use with slotted posts
• Morticed and tenoned frame for extra strength
• Centre rail(s) for additional support
• Stainless steel fixings
• All timber is planed all round

Convex Tongue & Groove

These attractive panels are a variation on standard tongue and groove effect   panel, with the addition of a graceful arched top in a chouce of heights from   0.91 – 1.83m high.  Supplied in the natural finish.

These panels are fully framed with 50mm top and bottom rail and 45mm side   rails infilled with tongue & groove effect boards.  Support rails of 70mm.    The panels can be erected with or without a gravel board

Timber Fencing – Featherboard

One of the strongest panel fencing available. All weathered, clad with 100mm   featherboard pales. We now supply an improved specification for these panels where the top and bottom rail heavier, this means an even stronger fence for   you.

All panels are 1.83m wide and 50mm thick, if you need a narrower panel to   complete your fence, it is fine to cut a panel to the correct size on site

Also known as Closeboard fencing, Close Board Panels or Feather Edge fencing

Main Features

• Rails are precision sawn, resulting in a neater finish and increased   strength
• Designed for use with slotted posts
• All fixings stainless steel or galvanized
• Constructed with three rails for extra strength
• New improved heavier top and bottom rails for extra strength
• Slotted Posts – Intermediate, Ends/Corners
  Gravel Boards use code 667600
• Capping Rail for use with Intermediate posts   code 667700
• Capping Rail for use with End/Corner posts 667770
• Post Caps options
• 5″ Cap use code 641000
• Acorn 5″ Cap use code 645700BM
• Ball &   Collar use code 645880BM
• Half Round use code 668000

Timber Fencing – Post and Rail

A variety of post and rail fencing to suit most requirements including, standard unsawn, rough sawn nailed, heavy post and rail and morticed. These styles of fence are normally suited to agricultural areas and estate fencing.

Post & Rail Fencing (nailed)

This sturdy fencing   comprises of sawn square section vertical posts, with three horizontal rails,   nailed to the posts. There is a choice of either half round rails or sawn square   section rails. Allow one post for every 1.8m of fence, plus one for the end of   the run. Allow three rails for every 3.6m of 3-rail fencing

Post & Heavy Rail Fencing

This attractive   design will appeal to those who want a more unusual, retro, or “riven” look to   their fence. Comprising of half round vertical posts, with either three or four   mortices, for the irregular sawn horizontal rails to insert into. Allow one post   for every 1.8m of fence, plus one for the end of the run.

Standard Post & Rail Fencing

This basic and versatile fencing comprises of machine rounded half round   vertical posts, with three horizontal machine rounded half round rails, nailed   to the flat face of the posts. Allow one post for every 1.8m of fence, plus one   for the end of the run. Allow three rails for every 3.6m of 3-rail fencing

Post and Rail fencing (morticed)

This attractive fencing   comprises of sawn square section vertical posts, with three or four horizontal   square section rails, morticed into the posts. There are additional prick posts   in between the posts at the mid bay point to give extra support. Allow one post   and one prick post for every 2.85m of fence, plus one post for the end of the   run.

Timber Fencing

We supply all types of timber fencing, and will be  happy   to give advice on which type would suit your needs. We can supply and install panels and gates.