Archive for the 'Iron Railing Fencing' Category
Iron Railing Security FencingIron Railing security fencing provides a strong and aesthetically pleasing perimeter security fence suitable for most requirements. Efficient manufacturing processes ensure that this type of security fencing is both long lasting and affordable |
|
 |
 |
|
Diamex panels have square hollow section verticals set at a maximum 100mm gap, heavy-duty channel horizontal rails and are supported by rolled steel joist posts.
Diamex® Fencing is supplied Hot Dip Galvanised to BS EN ISO 1461 or Galvanised and Polyester Powder Coated. Standard heights are 1800mm, 2000mm,2400mm and 3000mm and can be supplied with either square or angle tops. If undulating ground is a problem our special angle cleats allow the panels to be stepped on site and in particularly severe areas panels can be specially manufactured to suit the contour of the land. Domed headed bolts and permacone security nuts are supplied as standard to give additional security. Personnel and Vehicle entrance gates are also available to match all the Diamex® Fencing range. |
| IAE Diamex® To complement our standard DiamexŽ fencing, we offer four alternative designs. All have the same specification as our standard range, but each offer an additional feature. |
|
 |
 |
| Diamex® Elite An attractive and appealing fence, combining the strength of DiamexŽ with a more traditional appearance. |
Diamex® Prestige Elite further enhanced by the addition of a box section post with feature top. |
 |
 |
| Diamex® Dart DiamexŽ Dart is supplied with angle top rolled steel joist posts as standard and has a pressed steel spear to the top of each vertical. |
Diamex® Deterrent DiamexŽ Deterrent is supplied with angle top verticals as standard, and a crank to the top of each vertical which makes the fence even more intimidating to the would be intruder. |
|
Standard heights: 1800, 2000, 2400 and 3000mm. |
|
